Used Equipment Inspection Checklist

Updated 2026-11-21

Check the paperwork first, start the machine cold, look for leaks and smoke, work every hydraulic function under load, measure wear on tracks or tires, and get the seller's service records. If anything doesn't add up, walk away.

Paperwork

  • ☐ Serial / PIN plate present and readable — not ground off or painted over
  • ☐ Serial matches the title, bill of sale or invoice
  • ☐ Seller's name matches the paperwork
  • ☐ Service records and receipts
  • ☐ Hour meter reading matches wear (pedals, seat, steps, pins)

Cold start

  • ☐ Ask the seller not to warm it up before you arrive
  • ☐ Starts without a long crank or starting fluid
  • ☐ No heavy blue (oil) or white (coolant) smoke after warm-up
  • ☐ No knocking or ticking from the engine

Engine & fluids

  • ☐ Oil level and color — milky oil can mean coolant in the oil
  • ☐ Coolant clean, no oil film
  • ☐ Blow-by: excessive smoke from the breather tube
  • ☐ Belts, hoses and radiator fins in good shape

Hydraulics

  • ☐ Every function works smoothly and at full speed
  • ☐ No drifting when the boom, arm or bucket is held up
  • ☐ No leaks at cylinders, hoses or fittings
  • ☐ Hydraulic oil clean, not foamy

Undercarriage, tires & frame

  • ☐ Tracks: sprocket teeth not hooked, rollers not flat, track tension adjusts
  • ☐ Tires: tread depth, cracks, matching sizes
  • ☐ Pins and bushings: lift the bucket and look for slop
  • ☐ Frame, boom and loader arms: cracks or fresh welds

Cab & controls

  • ☐ All gauges and warning lights work
  • ☐ Seat belt, safety bar and interlocks work
  • ☐ Heat / AC if equipped
  • ☐ Glass and door latches

Test run

  • ☐ Drive forward and reverse in every range
  • ☐ Turn and brake under load
  • ☐ Dig, lift or push a real load
  • ☐ Recheck for leaks after the test