Skid steer attachments

Before buying any attachment, check two things: that it uses the same quick-attach mount as your machine (most use the universal skid steer plate), and that your machine has enough hydraulic flow — some attachments need high-flow.

Bucket

Digging, loading and moving dirt, gravel and mulch. Most machines come with a general-purpose bucket.

Check: Cutting edge and teeth wear, cracked welds, bent floor.

Pallet forks

Lifting pallets, posts, bales and building materials.

Check: Bent tines, frame cracks, tine locks that hold.

Grapple

Brush, logs, scrap and demolition debris. Root grapples dig; brush grapples hold.

Check: Cylinder leaks, worn pins, both lids closing evenly.

Auger

Post holes and tree planting. Bits come in different diameters.

Check: Gearbox leaks, worn bit teeth and flighting.

Trencher

Trenches for water, electric and drainage lines.

Check: Chain and teeth wear, boom and sprocket condition.

Brush cutter / mulcher

Clearing brush and small trees. Mulchers usually need high-flow hydraulics.

Check: Blade or tooth condition, bearings, hydraulic motor leaks.

Hydraulic breaker

Breaking concrete and rock.

Check: Bushing and tool wear, nitrogen charge, leaks.

Will it fit my machine?

Quick-attach plate: most skid steers and compact track loaders use the universal skid steer quick-attach, so most attachments swap between brands. Some older or compact machines use different mounts — compare the plate before you buy.

Standard vs high-flow: buckets, forks and grapples run on any machine. Mulchers, cold planers and some large augers and trenchers need high-flow auxiliary hydraulics. Check the attachment's required flow (gallons per minute) against your machine's spec.

Couplers and hoses: make sure the hydraulic couplers match, and that electrical plugs match if the attachment has them.

Attachments for sale

No attachments listed right now.

Attachments at auction

Listed on other sites. Rig Dog isn't the seller. Tapping opens the original auction.